Official setup guide
How to Set Up Your ZONFLON Ride Dog Car Booster Seat
Get your ZONFLON Ride dog car booster seat ready for comfortable everyday travel. This guide covers positioning, the vehicle seatbelt, the headrest strap where fitted, and the harness tether.
How to install your Ride dog car booster seat
Position the booster seat
Place the booster seat securely on the vehicle seat, following the placement shown in your instruction manual.
Secure it with the vehicle seatbelt
Thread the vehicle seatbelt through the designated safety loops. Buckle it until it clicks, then check that the booster seat is securely positioned.
Fasten the headrest strap, where fitted
If your booster seat has a headrest strap, fasten the adjustable strap around the headrest and secure it before driving.
Connect the tether to your dog’s harness
Clip the safety tether to your pet’s harness, never to a collar. Always secure the tether before driving.
Check before every journey
Check the seatbelt, straps and harness connection before setting off. Make sure every fastening is secured, and keep your pet supervised.
Important travel guidance
- Use with a pet harness only; do not attach the tether to a collar.
- Secure the booster seat with the vehicle seatbelt and check all straps before driving.
- For pet use only. Never leave your pet unattended in a vehicle.
- This booster seat has not been crash-tested.
Everyday care
Check the seat, safety loops, straps and tether regularly. Follow the care label supplied with your booster seat for cleaning instructions. If a fastening or strap is damaged, contact us before using it again.
Common questions
Can I attach the tether to my dog’s collar?
Use a harness instead. The tether must be clipped to your pet’s harness, never to a collar.
Do I need to use the vehicle seatbelt?
Yes. Thread it through the designated safety loops and buckle it until it clicks. The headrest strap, where fitted, is used alongside the vehicle seatbelt.
What if the booster seat looks compressed after unpacking?
Remove the packaging and allow it to fully expand before use. Contact us with your order number and a short description if you need help.
What should I check before driving?
Check that the booster seat is secure, the vehicle seatbelt is buckled, any fitted straps are fastened, and the tether is connected to your dog’s harness.
Need help?
Email support@beddypets.com with your order number and a short description of what you need help with. A photo or short video is welcome if it helps explain the issue. You can also contact us through the channel where you purchased your booster seat.